Tag Archive | "Haas Automation"

Preventive Maintenance as an Investment

Tuesday, March 12, 2013

Comments Off

Courtesy Haas Automation, Inc. To achieve trouble-free and safe operation you should do the following: Change the oil regularly, rotate the tires, flush the cooling system and change the coolant, replace the air filter and fan belts – oh, and don’t forget the shock absorbers. Rest assured, this is sound advice; and followed with some […]

Continue reading...

DOs and DON’Ts for Haas CNC Machine Tools

Tuesday, March 12, 2013

Comments Off

SAFETY 1. DO: Only use trained operators. Haas machines are to be operated only by trained personnel in accordance with the safety decals, and the Operator’s Manual safety procedures and instructions. Machine tools are complex and highly technical. Untrained workers can unintentionally cause severe damage to your machine, or injury to themselves. 2. DO: Check […]

Continue reading...

2012 Best Year Ever for Haas Automation

Monday, February 11, 2013

Comments Off

We are happy to report that 2012 was the best year in Haas Automations’s 30-year history, with revenues exceeding $967 million – an increase of 11.5 percent over 2011 – and CNC machine tool production exceeding 13,300 units, an increase of 5 percent. The 2012 numbers reinforce Haas Automation’s position as the world’s leading CNC […]

Continue reading...

Lights, Camera, Action!

Thursday, August 30, 2012

Comments Off

The very latest cinema camera technology comes from the likes of P+S TECHNIK. In just 20 years, the company has helped transform the way films are made.

Continue reading...

HTEC Conference Welcomes Latin American Schools

Tuesday, June 14, 2011

Comments Off

Since its inception, the Haas Technical Education Center (HTEC) Network’s purpose has been to promote high-quality manufacturing education. A key part of its efforts is organizing the HTEC conferences that bring together representatives from Haas Automation, local Haas Factory Outlets (HFOs), educational institutions, and industry to improve teaching techniques and materials.

Continue reading...

Get The Haas You Want – And Then Write Off the Entire Cost in 2011

Monday, May 23, 2011

Comments Off

Through two congressional acts late in 2010, the Section 179 Tax deduction limit was increased to $500,000 for the 2011 tax year, and the total amount of equipment that can be purchased was increased to $2 million. Additionally, the “Bonus Depreciation” was increased to 100% on qualified assets.

Continue reading...

Haas VMCs Helps Russian Pair Manufacture Sport Aircraft

Monday, May 2, 2011

Comments Off

There are those who, thanks to the unpredictable forces that govern the shape of existence, come into this life in human form when they’d probably be better off with feathers and wings. They live and work amongst the earthbound, but their souls are tuned to the heavens. I know what they look and sound like, because in my late teenage years and early twenties, I was one of them.

Continue reading...

NTMA Trains the Future on Haas Machines

Thursday, April 14, 2011

Comments Off

Filling the Gap Story and photos by Brad Branham Need a machinist? You’re not alone. Even under the present global economic conditions, the demand for engineers, machinists, and machine operators persists. In fact, these three professions have made Manpower Inc.’s Annual 10 Hardest Jobs to Fill list for 4 years running. Engineers, machinists, and machine […]

Continue reading...
Page 1 of 3123